Two brochures sit on the kitchen table. One shows a campus lawn, a lecture hall, and a tuition figure that will repeat four times. The other shows a welding booth, a pair of gloves, and a total price smaller than a single year at the first school. Between them sits one teenager, and a gap of tens of thousands of dollars that the family has to explain — to him, and honestly, to themselves. The old script said the choice was obvious. For a growing number of Texas families, it no longer is.
Option One: Trade School, Priced Out Honestly
Average trade school programs in Texas cost $5,000 to $20,000 in total and take one to two years to finish. That is the whole credential for the whole price: tuition for a welding, electrical, HVAC, plumbing, or diesel program at a public technical college or community college, with the graduate out and employable before a university student has declared a major.
The earnings side starts just as fast. A trade school graduate can be earning $45,000 to $65,000 by age twenty, carrying no student debt. Bureau of Labor Statistics figures put median pay for electricians and plumbers at roughly $60,000 and up, and experienced Texas tradespeople — in oil work, commercial construction, and specialized welding especially — regularly earn $80,000 to $120,000 or more, with business owners above that. None of that requires four years of tuition first. It requires licensing, experience, and showing up, in a state that is building faster than it can staff the work.
Texas sharpens the case. Construction, energy, manufacturing, and housing demand keep skilled trades in chronic short supply, and schools such as Texas State Technical College and local community college workforce programs run direct pipelines to employers. Paychecks also stretch further with no state income tax taking a slice.
Option Two: College, Priced Out Honestly
A four-year public university in Texas runs roughly $11,000 per year in tuition alone for in-state students — before fees, housing, and food — and private schools are multiples of that. The typical graduate starts earning at twenty-two, often carrying $30,000 or more in student loans. Nationally, student debt now exceeds $1.7 trillion, which is the backdrop every family at that kitchen table is quietly aware of.
None of that makes college a bad buy. It makes college a specific buy. A degree remains the required ticket for medicine, law, engineering, and teaching, and the right degree from a sensibly priced school still pays for itself many times over. The weak investment is narrower and worth naming plainly: an expensive degree with uncertain earnings at the end of it, financed with heavy loans. Research from Georgetown University’s Center on Education and the Workforce has found that a significant share of bachelor’s degree holders earn less over their working lives than workers holding strong trade credentials. The wage premium belongs to the right qualification, not to the word degree itself.
Weighing the Two on Fit, Not Just Money
Cost is the easy column. Fit decides whether either price gets its money’s worth. Some teenagers light up in a shop and shut down in a lecture hall. For a hands-on learner, trade school is not a consolation prize — it is the setting where that student will actually do well, finish, and start a career with confidence instead of a transcript of struggles. Other teenagers are genuinely academic: they read for pleasure, argue ideas at dinner, and want a profession that sits behind a desk or a lab bench. Pushing that student toward a trade for financial reasons alone is its own kind of mismatch.
Two other questions belong in the weighing. How soon does this teenager want income? An eighteen-year-old set on financial independence will feel four more years of classroom as a sentence. And how much debt would college actually require in this family’s case? If scholarships and savings make a degree low-debt, the trade route’s biggest advantage shrinks. If college means $80,000 or more in loans against uncertain earnings, the near-zero debt of a trade program changes every choice that follows graduation — where to live, what risks to take, when to start a business. Trades are also among the most direct routes to owning one: the electrician who opens a shop in his mid-twenties and hires crews is following a path with no real equivalent in most salaried professions, and it depends on exactly the skills worth learning to stay employable in 2026 — practical, licensed, and in demand.
What the First Five Years Look Like on Each Path
Stretch both choices across the years right after high school and the shapes differ more than the brochures suggest. On the trade path, year one is spent in a program or a first apprenticeship, costing some money but also, in the apprenticeship case, already paying a wage. By year two or three the graduate is working full-time in the trade, earning in that $45,000 to $65,000 starting band, with raises tied to licenses and experience rather than to annual review cycles. By year five, a twenty-three-year-old tradesperson can hold a journeyman credential, five years of paid experience, and no loan payment in the monthly budget — the position from which saving a deposit, buying tools, or planning a business becomes realistic.
On the college path, the first four of those years are spent earning little and paying steadily: tuition each year, plus living costs, with part-time work covering only part of it. The degree arrives at twenty-two, and the first graduate job usually starts below the tradesperson’s fifth-year pay, with a loan payment leaving the account each month. That is not an argument that college loses — graduate earnings keep climbing, and in degree-required professions they climb past most ceilings. It is an argument for honesty about timing. The trade path front-loads income and experience. The college path front-loads cost and pays later. A family choosing between them is really choosing which shape fits its teenager’s patience, its own finances, and the career at the end of the road.
The Third Option at the Table: Apprenticeships
Before signing anything, price the route that is neither brochure. Registered apprenticeships put a teenager to work full-time under experienced tradespeople while classroom instruction runs alongside, with wages from the first day — typically starting at 40 to 50 percent of journeyman pay and rising as skills grow. Many Texas apprenticeships in electrical, plumbing, HVAC, and ironwork are sponsored by unions or trade associations, so tuition is low or nonexistent: the employer funds the training because the employer needs the worker.
Programs can be compared through Apprenticeship.gov’s registered apprenticeship finder, which lists them by place and trade. Completion brings a nationally recognized credential plus years of paid experience, the combination employers value most. Compare any classroom program against an apprenticeship on three measures: total cost, time to full journeyman wages, and placement record. The hybrid also exists — technical college programs that partner with apprenticeships, pairing classroom theory with paid hours — and it is often the strongest preparation of all.
Checking Any Program Before Money Moves
Whichever direction wins, the program itself needs the same hard look, because quality varies far more inside each route than between the routes. Ask about accreditation and approval by the state licensing board for the trade. Ask for job placement figures, and notice whether the answer is an audited number or a marketing claim. Look for employer partnerships — companies recruiting from a program is the clearest signal that its training matches real work. Compare total cost against realistic starting wages in the family’s own Texas metro, not a national brochure figure. Count the hands-on hours; a trade program heavy on classroom theory and light on shop time is selling the weaker half of the product. Public community college and technical programs are usually the best value in Texas, and a short conversation with recent graduates — found independently, not supplied by the admissions office — settles most remaining questions.
The Conversation That Actually Decides It
Frame the talk around the teenager, not around the family’s pride. Which path fits who this person is, and where do they want to be at twenty-five? Visit a technical college together, the same way a campus would be visited. Talk to working tradespeople, most of whom are glad to describe the work honestly. Run the real numbers on paper: program cost, years until income, likely starting pay nearby, and the loan payment the college route would carry. Then say the stigma part out loud so it loses its power: a master electrician earning $120,000, debt-free at thirty, made a sound decision by any measure that pays a mortgage. Prestige is not a currency any lender accepts.
The Recommendation
For a teenager who learns by doing, wants income soon, and faces a college bill that means heavy debt, choose the trade route — trade school or, better still, a registered apprenticeship — and choose it without apology. For a teenager aiming at a profession that legally requires a degree, or one who is academically driven with a low-debt way to pay, choose college and choose it the same way. What deserves refusing is the default: four expensive years picked because the neighbors did, or a trade picked out of fear rather than fit. The two options are not rivals. They are tools. The family that prices both honestly, matches them to the teenager actually sitting at the table, and keeps the door open to the common later move — trade first, a business degree afterward, often paid by an employer — will land on the right side of that gap of tens of thousands of dollars.
1 Comment